How can I initialize the CMOS password?

A. 1

I can initialize CMOS.
If you're a regular computer, first unplug the power cord completely, then open the main body and look for the motherboard.
If you look at the main board, you can see a silver, flat mercury battery.
Remove this mercury battery.
After 30 seconds, put the battery back in and turn it on.

Gentleman 9 years ago 0

OK

A. 2

It's similar to the one on the top, but try the following.

1. Turn off the power. At this point, the code itself should be pulled out completely.
2. Open the main body and locate the main board.
3. Locate and remove the silver round mercury battery.
4. Press the computer power button for about 30 seconds.
5. Reinsert the battery, connect the cord to the power source, and press the power button to see that it is initialized.

Gentleman 9 years ago 0

OK

A. 3

You can initialize it like your superiors said.
If you turn on the window after you're done, it'll be reset to the date.
Set the date back to today's date.

Gentleman 9 years ago 0

OK